LED strips are a great way to add accent lighting to any room, but their wires can be unsightly. In most cases, you can easily hide the wires by tucking them somewhere. But how can you do it really nicely, without any part of the wire popping up here and there? Here we will tell you about several methods to do it.
Molding plastic will help you
Molding plastic is perhaps the most reliable way to hide LED wires. You can find this material in any construction store, it is easy to work with, and it will perfectly cope with the task.
You will need:
- molding plastic;
- razor blade;
- nails;
Instructions:
Step 1. Mold the plastic corners along the entire length of the wire. In case you are not good at molding, you can buy two outside corner moldings and put them on either side. This will give you a nice gap in between to run your wires down.
Step 2. Measure the length of the wire you need to cover and cut the molding plastic to size. You can use a saw or a sharp knife for this. By pre-drilling holes in the molding, you can avoid the inconvenience and danger of accidentally drilling through any cords while mounting it on the wall.
Step 3. To secure your molding to the wall, use nails in the pre-drilled holes. String your wires through any gaps between plastic or wood from one end of the piece to the other. Moreover, it is easy to run multiple wires through a single section of molding.
This way you can be sure that the wires are securely hidden and will not pop up anywhere.
Glue gun
Hiding LED strip wires with a glue gun is another great way to do it. You can find this tool in any hardware store, and it is very easy to use.
You would need:
- glue gun;
- glue sticks;
Instructions:
Step 1. Preheat the glue gun for about 5 minutes. This will ensure that the glue sticks melt quickly and evenly.
Step 2. Apply a generous amount of glue to the back of the LED strip, making sure that all the wires are completely covered.
Step 3. Press the LED strip into place and hold it there for a few seconds to allow the glue to set.
This method is very simple and effective, but keep in mind that it is not suitable for use in damp or wet areas.
Use wire hiders
If you want an even more discreet way to hide your LED wires, then you can use special wire hiders. These are small plastic channels that you can attach to the wall or underside of furniture to neatly tuck away cords and wires.
You will necessitate:
- wire hider;
- double-sided tape or adhesive strips;
Instructions:
Step 1. Choose a wire hider that is big enough to fit your cord or wire.
Step 2. If necessary, cut the wire hider to size with a sharp knife or scissors.
Step 3. Attach the wire hider to the wall or underside of furniture using double-sided tape or adhesive strips.
Step 4. Gently push the cord or wire into the wire hider. That's it! Your wires will now be hidden from sight.
This is a very easy method if you want to hide a small number of wires. But if you have a lot of them, then this option may not be the most convenient.
Panel end cap + wall tape
End caps are small plastic caps that you can use to cover the ends of LED strips. They come in different sizes and colors, so you can find one that matches your décor. And if you want an even more discreet look, you can use clear end caps.
You should take:
- panel end cap;
- wall tape for both sides;
- razor;
- tape measure.
Instructions:
Step 1. Resize the panel end cap. Cut it with a sharp knife or razor if necessary. Depending on the number of angles and size of your wall, you will need a certain amount and length of panels.
Step 2. Apply one side of the double-sided wall tape to the rear of the panel end cap. Make efforts to keep the edge straight, parallel with the curve in front, which is the finished edge of the molding. On condition that you're using triple-thickness double-sidewall tape, you'll need to trim the panel's edges so that they match the shape of your molding.
Step 3. Mount the panel on your wall. This step won`t be difficult, as the wall tape is very sticky. The moment you start peeling off the backing paper, be careful not to displace the panel. Once you have it in place, use a utility knife to score along the edge where the panel meets your molding. This will give you a nice gap in between to run your wires down.
Step 4. Measure the length of the wire you need to cover and cut the molding plastic to size. You can use a saw or a sharp knife for this. By pre-drilling holes in the molding, you can avoid the inconvenience and danger of accidentally drilling through any cords while mounting it on the wall.
Step 5. Match the wires inside the panel end cap with the holes you drilled in the molding. Gently push the wires through and then screw the molding onto the wall. You can now use this space to hide your cords and wires.
This method is ideal for hiding a large number of cords and wires, as it provides a nice, discreet way to run them down your walls.
Wires clips
If you want an even simpler way of hiding LED strip wires, then you can use wire clips. These are small plastic or metal clips that you can attach to the underside of furniture or along baseboards to neatly tuck away cords and wires.
You will need:
- wire clips;
- double-sided tape or adhesive strips.
Instructions:
Step 1. Choose a wire clip that is big enough to fit your cord or wire.
Step 2. If necessary, cut the wire clip to size with a sharp knife or scissors.
Step 3. Attach the wire clip to the underside of furniture or along a baseboard using double-sided tape or adhesive strips.
Step 4. Gently push the cord or wire into the wire clip. That's it! Your wires will now be hidden from sight.
This is a very simple and convenient way to hide a small number of LED strip wires. And since wire clips come in different colors, you can even find ones that match your décor.
Is hiding LED strip wires very difficult?
No, it's not! With these four methods, you can easily and quickly conceal them so that they are not visible. Choose the option that best suits your needs and start hiding those wires!
In most cases, the LED strips will be installed in a way that makes them hidden. However, there are times when they may be visible and you will want to hide them. There are several ways to do this and the best method will depend on your specific situation.
How do I hide the LED wires in my car?
There are a few options available to you when it comes to hiding the wires for your LED strips. You can:
- use zip ties:
Your car probably came with a few zip ties in the glove box. These can be used to tidy up the wires and keep them out of the way.
- use adhesive tape:
Adhesive tape can be used to secure the wires to the underside of your car's dashboard or door panels.
- use wire loom:
A wire loom is flexible tubing that can be used to neatly bundle wires together. It's available in various sizes and colors, so you can choose one that best suits your needs.
- use wire harnesses:
Wire harnesses are another option for hiding and organizing your car's wiring. They typically come with multiple connectors that allow you to easily connect and disconnect electrical components.
-use Loctite super glue to secure the wires in place:
This is a quick and easy way to keep the wires out of sight. Simply apply a small amount of glue to the underside of the dashboard or door panel and press the wires into place.
-tuck them into the crevices of your car's interior:
Moreover, you can also try to tuck the wires into the crevices of your car's interior. This includes the space between the seats, under the carpet, and behind the trim panels. With a little creativity, you should be able to find a place to hide the wires so they're out of sight.
If you're really looking to hide the wires, you can purchase special tape that is designed to blend in with your car's paint job. No matter which method you choose, make sure that the wires are securely fastened so that they don't come loose and cause a short circuit.
Can you hardwire LED strips?
If you only need to use your bathroom for basic activities such as washing your face and brushing your teeth, you can install LED strip lights without needing a plug-in power block. To do this, you just need to hardwire the LED strips to a wall switch. It is not easy to hardwire LED strip lights in the kitchen. The kitchen has more appliances that need to be plugged in, so it can be difficult to find a place to hide the wires.
You may need to hire an electrician to help you with this project. Hardwiring LED strips are not recommended for novice do-it-yourselfers. If you are not familiar with electrical wiring, it is best to leave this project to a professional.
Conclusion
Hiding LED strip wires are not difficult, but it will take some time and effort. The best method will depend on your specific situation. If you need to hide the wires in your car, you can use zip ties, adhesive tape, wire loom, or wire harnesses. If you're looking to hardwire your LED strips, it is best to hire a professional electrician. In most cases, the LED strips will be installed in a way that makes them hidden. However, there are times when they may be visible and you will want to hide them.